ProStart CT-3271 Guía de instalación descargar pdf (Pagina 20)

p.20 CT-3271

Arming and disarming the starter kill

This added security feature will prevent the vehicle from starting with the Ignition key when the

starter kill is armed. If the system was installed with the starter kill option, you will not be able to

start the vehicle with the key unless the system has been unlocked first or put into Valet mode.

Note: If the Starter Kill is installed, the vehicle will benefit from a protection against starter

motor damage that could occur after remote-starting the engine should the user, by force of

habit, turn the ignition key to the CRANK position.

The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm

automatically) or Active Mode (so as to require the user’s intervention for arming). By default, the

Remote Car Starter is configured to Passive Mode.

Note: This feature is only available if button is configured as LOCK or UNLOCK function.

1) Passive mode:

a) To arm the Starter Kill, press the button on the transmitter, OR

i) In Passive Mode, the Starter Kill will also arm automatically 1 minute after the

ignition is turned OFF or once the last door is closed (if the doors are monitored).

ii) The LED on the antenna will remain OFF during the countdown preceding the

activation of the Starter Kill.

iii) Once the activation countdown expires, the LED will flash slowly to indicate that

the Starter Kill is now armed.

b) To disarm the Starter Kill, press the

button on the transmitter.

i) The Starter Kill will automatically rearm itself after 1 minute if no door is left

opened (if the doors are monitored) and the ignition is not turned ON.

2) Active Mode:

a) To arm the Starter Kill, press the button on the transmitter.

i) The parking lights will flash once.

ii) The LED on the antenna will flash slowly.

b) To disarm the Starter Kill, press the

button on the transmitter.

i) The parking lights will flash twice.

ii) The LED on the antenna will remain OFF.

Installation-programmable Features

The following features can be programmed according to the needs of the installation and the

requirements of the user:

Ignition-Controlled Door Locks

• Ignition Lock disabled: turns OFF the Ignition Lock feature.

• Ignition Lock enabled: locks all Doors when the key is in the ON position and the user

presses the Brake Pedal. Similarly, when the Ignition key is turned to the OFF position, the

Doors will unlock.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

ProStart CT-3271 Guía de instalación Pagina 20