ProStart CT-3271 Guía de instalación descargar pdf (Pagina 16)

p.16 CT-3271

Entering Programming Mode

This allows the installer to program the unit. Once the system is in programming mode, the

installer will have up to 20 seconds to select one of the sub-menus. If the installer fails to select a

sub-menu before the 20-second delay, the system will exit programming mode.

Using the Hood Pin

Using the Antenna Programming Assistance

Button (A.P.A.B.) (Optional)

•

Press and hold the hood pin for 4 seconds.

•

Make sure the hood is closed.

•

Release the hood pin.

The parking lights will turn ON.

•

Turn the ignition key to the IGNITION ON

(RUN) position.

• While the parking lights are ON, press the

hood pin once more and release

immediately.

The parking lights will turn ON and stay ON

for 20 seconds.

• Within 5 seconds, press the programming

button on the antenna twice for 1 second

each time.

The LED will come ON solid.

• You now have 20 seconds to select one of

the sub-menus.

• You now have 20 seconds to select one of

the sub-menus.

Note: To exit programming mode, close the

hood.

Note: To exit programming mode, press on the

antenna button once (the LED will come ON)

and release.

The Programming Assistance Button (a.k.a. PAB)

The PAB is located

on the side of the

module. This push

button mimics the

hood-

pin switch in

order to avoid having

to get out of the

vehicle and pressing

the hood-pin switch.

The PAB will work

only when the hood

is up.

Sub-menus:

a) Transmitter Programming

b) Programming Options

c) Honk Horn Timing Adjustment

d) Tach Programming

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Comentarios a estos manuales

Sin comentarios

ProStart CT-3271 Guía de instalación Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Arrancadores remotos ProStart CT-3271