ProStart CT-5072 Guía de instalación descargar pdf (Pagina 3)

Quick installation Guide http://www.autostart.ca P.3

x LOCK to access mode 1;

x UNLOCK to access mode 2;

x TRUNK to access mode 3;

x START/STOP to access mode 4.

3. The parking lights will flash 1, 2, 3 or 4 times to confirm entry into a mode.

4. Release the brake pedal.

Once the desired mode has been selected, the unit will fall (by default) into function #1 of that mode; you can

now select the option you want in function 1. Once this option has been chosen, the unit will move on to

function 2 of the mode selected, and so on.

x LOCK to access option 1;

x UNLOCK to access option 2;

x TRUNK to access option 3;

x START/STOP to access option 4.

5. After the programming of any mode is completed, the parking lights and the LED on the antenna will turn

ON for 20 sec. During those 20 seconds, select one of the sub-menus if needed.

PROGRAMMING OPTIONS

MODE 1

* INDICATES DEFAULT SETTING

FUNCTION 1 – Ignition-controlled door locks

OPTION 1* Ignition lock DISABLED

OPTION 2 Ignition lock ENABLED

OPTION 3 Ignition unlock only

OPTION 4 Ignition lock only

FUNCTION 2 – Secure Lock

OPTION 1* Secure lock DISABLED

OPTION 2 Standard secure lock ENABLED

OPTION 3 Smart secure lock ENABLED

FUNCTION 3 – Door lock / unlock pulse timing

OPTION 1* 7/10-sec. lock / unlock pulses

OPTION 2 4-sec. lock / unlock pulses

OPTION 3 7/10-sec. lock pulse and two ¼ -sec. unlock pulses

OPTION 4 1/10-sec. lock / unlock pulses

FUNCTION 4 – AUX 3 Programming / TRUNK output

OPTION 1* Constant

OPTION 2 1-sec. output, disarm and passive rearm after 30 sec.

FUNCTION 5 – AUX 2 Programming

OPTION 1* Car Finder

OPTION 2 Toggle ON – max. 30 sec.

OPTION 3 Constant output

MODE 2

* INDICATES DEFAULT SETTING

FUNCTION 1 – Home Valet™

OPTION 1 N/A

OPTION 2* N/A

FUNCTION 2 – Safe Start

OPTION 1 Safe start ENABLED

OPTION 2* Safe start DISABLED

OPTION 3 “Swap Start”

FUNCTION 3 – Engine Run Time

OPTION 1 Run time = 3 minutes in gas mode / 8 minutes diesel mode

OPTION 2* Run time = 15 minutes in gas mode / 20 minutes diesel mode

OPTION 3 Run time = 25 minutes in gas mode / 30 minutes diesel mode

FUNCTION 4 –Idle Mode & Turbo Mode (auto) / Turbo Mode (manual)

OPTION 1 Idle mode & turbo mode DISABLED (AUTO) / turbo mode DISABLED (MANUAL)

OPTION 2* Idle mode & turbo mode ENABLED (AUTO) / turbo mode DISABLED (MANUAL)

OPTION 3 Idle mode & turbo mode ENABLED (AUTO) / turbo mode ENABLED (MANUAL)

FUNCTION 5 – Engine type and Cold Weather Mode

OPTION 1 Diesel mode with 20-minute run time in cold weather mode (30-sec. wait to start delay)

OPTION 2* Gas mode with 3-minute run time in cold weather mode

OPTION 3 Diesel mode with 8-minute run time in cold weather mode (18-sec. wait to start delay)

OPTION 4 Diesel mode with 8-minute run time in cold weather mode (7-sec. wait to start delay)

MODE 3

* INDICATES DEFAULT SETTING

FUNCTION 1 – Chirps

OPTION 1 Warning chirps only – Lock confirmation upon 2

press of LOCK button

OPTION 2* Chirps ENABLED

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

ProStart CT-5072 Guía de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Arrancadores remotos ProStart CT-5072